The type of YBX oil pump soaking trough is the soaking equipment which is used before washing the oil pump. The machine has box type of structure, setting three trough wheels inside, and the entry and lift of the oil pump are finished by the trough wheel. It is simple and practical, novel in design and unique in structure.

technical parameter:

（1） applicable pump diameter(OD)：Φ60-Φ114（mm）
（2） applicable length：6-9（m）
（3） norm rotating speed of principal axis ：2（r/min）
（4） overall dimensions:10150*1500*1300(mm)(length*width*height)
（5） soaking medium：diesel
（6） service hydraulic station power：7.5(KW)

　　　　　　　　The type of QJX-38/83 oil pump washing machine

　　The type of QJX-38/83 oil pump washing machine is mainly used for the washing of oil pump, and its appearance structure and work principle are the same with the tubing washing machine, expect that inter or external washing device and the washing pole have a new change in the size. The length of the mainframe is24m.

technical parameter: 　　　　　　　　　　　　　　　　　　　　　
（1） applicable oil pump range：Φ38 -Φ83
（2） applicable length：3.5-7.5(m)
（3） working linear velocity：10-12（m/min）
（4） rotating speed of washing equipment：80-100（r/min）
（5） working pressure of hydraulic system：8（MPa）
（6） norm flow rating of hydraulic system：100（l/min）
（7） total power of equipment：20.2(KW)

The type of GSJ-38/83 oil pump testing presser
(there are two specifications of terminal surface sealed and whole sealed,also manual and automatically controlled)

　　The oil pump testing presser is the necessary equipment when the tubing pump factory and oil-field pump repaired shop test press to the oil pump. The machine can test the body of pump's leakage by the means of main body testing-press subsection and it adopts the hydraulic controlled centrifugal pump to full the testing medium fleetly and when the oil cylinder boosts the pressure to the fixed, it will keep the pressure for 3 minutes, and test the leakage, which proves the oil pump is qualified or not. In the whole test using a shot time and efficiency, judging accurate, safe and simple operation. In a word it is an ideal head instrument to test the oil pump.

main design parameter：

（1） applicable range of the pump： Φ38～Φ83length 4.2m～8m
（2） the max testing pressure：25Mpa
（3） norm torque of main pincer： 4KN·m
（4） norm rating speed of main pincer： 60r/min
（5） norm pressure of hydraulic system： 21Mpa
（6） norm flow rating of hydraulic system： 116 l/min
（7） total device power： 25KW
（8） overall dimension of mainframe： 10400*1000*1600
（9） the components are made up by oil box、mainframe、operating board and a piece of basic map。

The type of YNJ-90/2 oil pump piston hydraulic spinner is installed indoors

　　The type of YNJ-90/2 oil pump piston hydraulic spinner is installed indoors, and it is mainly used to make-up or break-out the valve thread of the oil pump piston. The surface of the piston is very smooth, and for the sake of not to damage the piston when making-up or breaking-up it, we adopt the way of that the hydraulic oil cylinder bring along the card tile clamps. The card tile's surface is smooth and the hardness is low, the clamping force is controlled by spill valve, the function of the oil cylinder corresponds with the backup pincer, the main pincer uses the spinner's main pincer which is high speed and heavy torque.

the main technical parameter：

（1） overall dimension of mainframe：1800*900*1000
（2） piston range： Φ38、Φ44、Φ56、Φ70、Φ83
（3） main pincer torque： 2KN·m
（4） backup pincer clamping force： 20t
（5） total power： 20KW

The minitype of JX-1A oil pump washing machine

　　The minitype of JX-1A oil pump washing machine is mainly used in washing all kinds of pint-sized parts. The whole machine is the tubby structure, and the overall dimension is 1100*1420. The machine adopts the structure of basket net rotating and annular pipe spurting to wash the pint-sized parts. The washing medium is diesel oil or cleaner. The principle axis is driven by hydraulic motor, and could be stepless speed changing. The hydraulic source may use the other hydraulic device or setup separately. The water pump electrical machinery power is 2.2kw.

The type of FYJ-A valve ball muller、vacuum monitor

　　The type of FYJ-A valve ball muller is the special device to grind floating valve ball of the oil pump，which is made up by abrasive disk and planet gear machine，and the valve ball completes the grinding process under the pressure of spring. And each time it can grind nine groups of valve balls、valve flats.

technical parameter：

（1） applicable pump diameter：floating valveΦ32-Φ56（mm）fix valve ：Φ35-Φ56（mm）
（2） abrasive disk rating speed：10（r/min）
（3） max abrasive disk circle speed：0.2(m/s)
（4） the unit pressure of the ground abrasive parts：15（N）
（5） dimension of the surface of device：Φ780*1030（mm）
（6） electrical machine power：0.75(KW)

The box type of SX-1 oil pump washing machine

the using and structure

　　The box type of SX-1 oil pump washing machine is the special device to wash oil pump. The mainframe is the sealed box structure, both ends consist of idler wheel flat for the little cars delivery moving. The additional device are composed with hydraulic station、operating board and water pump. The machine uses the high-pressure steam and hot water to wash the outside of the oil pump as the same time wash the each inside wall to reach the purpose of washing. The machine can wash four oil pumps each time, and has the prominence characters of simple structure, operating easily and high-salary, which is widely used in the every large oil-field.

technical parameter：

（1） applicable range of oil pump：Φ38-Φ83（mm）
（2） applicable length：4-9（m）
（3） working pressure of hydraulic system：↑8(MPa) ↓：6(MPa)
（4） norm flow rating of hydraulic system：100（l/mm）
（5） total device power：24.3(KW)

The type of ZX-83 oil pump ram cylinder washing machine

　　 The machine is mainly used in washing the oil pump ram cylinder which adopts the manner of soaking first and flushing after. It is simple in structure and easy to operate.

technical parameter：

（1）applicable ram cylinder≤83
（2）the number of soaking ram cylinder once≤9
（3）total power:　3KW

The type of TBST-00 platform oil pump testing presser

(not with the making-up and breaking-out buckle)

　　The machine is platform, under setting up pressure pump and accumulator.
It is easy to operate and reliable in performance.

The type of BCZ-00 oil pump taken-off-on machine

　　 The demand of making-up or breaking-out the parts inside the oil pump is high, and the any part can't be distortion、abrasion、scrape. The machine is special designed and produced to the character of the oil pump, and it carries the piston out of the head by the lash of hydraulic, then slides to the soaking box washing, further its structure is simple ,the operating is easy.

technical parameter：

（1） overall dimension：5000*620*1200
（2） applicable range：Φ60-Φ114
（3） working pressure of hydraulic system：10(MPa)
（4） norm flow rating of hydraulic system:46（l/mm）
（5） total power：5.5(KW)

The type of QXJ-1 oil pump washing machine

　　The machine is mainly used in automatically washing the rust inside the oil pump cylinder.