The type of JGXJ-A sub-well tools washing machine

The character and using:
　　The machine is mainly used to washing all types of sub-well tools、sealers、hydraulic power pincers and all kinds of minitype workpiece. The whole machine is the cylinder-box type, it adopts the closed washing manners of net basket joist rotating and reversely rotating. The net basket installs the rising device, so it is convenient to load or unload the materials. The washing medium is diesel oil or water, and the principle axis is driven by hydraulic motor, also it can stepless speed change. On the top of the machine, there is a turning arm hanger, which is flexible to operate, and the machine cover adopts the oil cylinder controlling the four poles, opening and closing are convenient. The machine is all controlled by electromagnetism commutator, hydraulic driven, and the speed can be adjusted, while the other characters are that it can wash a lot of workpieces, be easily to operate , high efficiency and safe 、reliable.

capability parameter：
1、the standard of washing net basket ：Φ1500＊400（㎜）
2、the weight of washing workpiece ：200（㎏）
3、 the rotating speed of washing basket ：2－10（r/min）
4、 the total power：18（kw）
5、 overall dimensions： 1600－2000（㎜）
6、 hoisting height ：2500（㎜）
7、 system pressure：21（MPa）

The type of GXJ-35/50 high pressure hydraulic jet washing machine

The using and structure

　　The machine adopts the internal advanced technique of high pressure hydraulic jet, which can wash the inside and outside of the tubing 、oil pump at the same time. And the machine is specially used in synchronously washing the inside and outside dirty layer of the tubing. The tubing rotates the nozzle relative to the interior and annularly rotates the nozzle to the exterior surface, just the once to and fro movement, the washing will be finished. And you can adjust the time differently according to the degree of the dirty on the pipe. The machine is effectual in washing and easy to operate, also it can be matched with the tubing straightener, which is used to washing the tubing directly after the oil tubing straightened.

technical parameter：
(1)、applicable range：Φ60-Φ114(mm)
(2)、washing length： 3-10 m
(3)、workpiece running speed：2-5(m/min)
(4)、pressure：35 Mpa
(5)、flow rating：50 (l/min)
(6)、total power of device：40 KW

The type of SYJ-650 movable testing presser

The using and structure

The machine can make testing press to some fixed device、tubing、oil pump、Christmas tree and some sub-well toos. The machine has the advantages of that the structure is compact, the weight is light, moving neatly and conveniently, furthermore setting up the promoting car. While the main character is that the testing presser sets the keeping pressure device, and it's no need to work continuously , just can be adjusted according to the testing pressure at any moment. After reached the stated pressure, the testing presser stops working and keeping the pressure automatically. The machine also sets up the delay device, and has a high stability. It is novel in design and the structure is unique, also simple and practical, consequently it is the ideal well product for oil-field users.

chechnical parameter：
(1)、the max working pressure：65Mpa
(2)、the max flow rating：18 l/min
(3)、total device power ：8 KW
(4)、volume 1000*600*800(㎜)

The device of repairing the sub-well tools

1. the type of GCA tool taken-off-on machine
　　the type of GCA tool taken-off-on machine is the special device to make-up or break-out the sub-well tools in oil-field, which has the characters of heavy torque and versatility.
2. the type of SX-2 sub-well tools washing machine
　　The machine is used to wash the sub-well tools in hot water, and then drying. It adopts the hydraulic automatically controlled.
3. the type of SGS-150 petroleum tools testing platform
　　the type of SGS-150 petroleum tools testing platform is used to test the testing pull and torsion revolution after sub-well tools repaired.
technical parameter：
(1)、max pull ：1900 KN
(2)、max pressure ：900 KN
(3)、max torque ：19 KN·m
(4)、rotating speed：40 r/min
(5)、max journey：1.8 m

The type of HS035-315 horizontalhydraulic taken-off-on machine

　　The machine's making-up and breaking-out force is 200t, and it is applicable to remove and load all kinds of linker、matched clamp with the manners of propping、grasping and pressing etc.

The type of YNJ-160/8 2M hydraulic spinner

The using and structure:
　　The main character of the machine is that it don't damnify the surface of the workpiece, which mainly uses two sets of clip tile friction locked backup tongs. There is a opening on the backup tong, and the workpiece can be put in vertically, the making-up or breaking-out is hydraulic driven. The machine also sets up the hydraulic power and operating board, which is convenient to operate and the performance is reliable. The machine is the ideal well device to the oil pump (tubing) factory and the oil-field repairing oil pump(tubing).
technical parameter：
(1)、norm torque lo.： 8 KN·m
(2)、norm torque hi.： 2.2 KN·m
(3)、norm rotating speed lo.： 15 r/min
(4)、norm rotating speed hi.： 54 rmin
(5)、open foot-path size： Φ160㎜
(6)、applicable range：Φ73-152 mm
(7)、norm pressure：14 Mpa
(8)、norm flow rating：75 l/min
(9)、total device power： 18.5 KW

The type of YNJ-160/8-2A sealer taken-off-on machine

Using and structure:
　　The machine is mainly used in making-up or breaking-out the sealer, also can do the same work to cylinder thread jointer. And the notable character of the machine is that the main tong and the backup tong can be used each other, so that the workpiece can be loaded and unloaded without turnaround. The structure is that the main tong is fixed, and the backup tong is powered by hydraulic to adjust the distance of making-up and breaking-out, moreover it locates the hydraulic power and operating board, which is convenient and flexible. All in all it is the most suitable device to make-up or break-out the sealer.

technical parameter：
(1)、norm torque：15 KN·M
(2)、rotating speed：15-54 r/min
(3)、open foot-path size：Φ200㎜
(4)、applicable range：Φ60-Φ155(㎜)
(5)、total device power： 18.5 KW

The type of YDXJ-60/152 hydraulic multifunctional overhaul machine

　　The machine is mainly used to repair the cylinder steel tube jointed by thread, and to the workpiece also can do a series of operations such as making-up、breaking-out、washing、testing pressing etc. The all repaired working can be finished in oil-field repaired oil pump workshop、tools workshop、repaired pipe workshop just possession of one set of hydraulic multifunction overhaul machine. And so it is the ideal well device to repair the oil pump、tubing and the sub-well tools in the oil-field.

technical parameter：
（1） overall dimensions：5500*600*700（mm）
（2） norm torque：（2.2-8）KN*m
（3） norm revolution：（15-54）r/min
（4） applicable range：60-152（min）
（5） system pressure：150Mpa
（6） norm flow rating：75 l/min
（7） testing pressure：35Mpa
（8） testing-press displacement：20 l/min
（9） testing medium:water、fix
（10） washing manner :jet
（11） washing medium: water(hot up)
（12） total device power：28.5KW