|
|
|
|
|
|||
|
|
|||||||||||
|
The type
of YXGJ-A tubing rough straightener The machine is mainly used to rough straighten the heavier camber tubing, and after the camber changes littler, it is put in straightener. The
type of YXGJ-A the type
of RY-250 heat insulator testing presser The machine is used to make a hydraulic pressure test to the repaired heat insulator. the type of RGSY-00 heat insulator screw sealed testing presser the machine is mainly used to make a screw sealed wear-pressing test to the repaired heat insulator screw. The type of GYSJ-60/114-80 tubing testing presser The
type of GYSJ-60/114-80 tubing testing presser is the necessary device
to the tubing factory and tubing testing pressure. It is （1） applicable diameter of the tubing：Φ73-Φ89（mm）
Annotate : the OD and the length can be manufactured according to the user's requirement. The type of QXJ-73/89 tubing washing machine The type of QXJ-73/89 tubing
washing machine is the special device to wash the tubing. It is made up
of machine rack、inner or exterior washing machine driven idler wheel、undercarriage、pumping
station、washing pump and controlled ark. The length of the mainframe is
21.9 meter. It adopts the hydraulic transmission and the technical device
controlled automatically. The machine uses two sets of idler wheels to
clamp the tubing and drive the tubing to act as rectilinear movement,
and by the means of inner and exterior washing machine washing the inside
and outside of the tubing at the same time, the purpose of cleaning is
complete. technical parameter： （1） applicable range of tubing：Φ73-Φ89（mm）
The type of YXGJ-120／160 tubing corrector
The type of ZTJ-73/89 tubing drilling rig
the main technical parameter： （1） norm torque of the principal axis：400
N·m note: the machine's base is the same with the tubing presser. The type of ZTJ-73/89 tubing open foot-path machine This is a special
device to examine the tubing qualified or not. Through the hydraulic motor
drives the long axis rotating and moving ahead, and there is an "open
foot-path compasses" on the other ends which can move ahead spirally,
by the means of that, the pipe can be test certified or not. And it is
certified if it is trough the "open foot-path" or else it is
uncertified. note: the machine's base is the same with the tubing presser. |
 |
 |
composed with the mainframe、hydraulic station、water supplied presser and
operating board etc. The all things like two ends of turning fasten、filling
liquid、boosting pressure、keeping pressure、unloading and the pipe rolling
out are all automatically controlled or handle controlled，and the users
can choose one of them according to the require. It needs 2-3 minutes
to test a tubing every time (except of the keeping pressure time). And
the max testing pressure can reach to 80mps, viz. 800kg/sq.cm. . The machine
has two testing press manners namely terminal surface sealed and whorl
sealed , and two kinds of specifications that handle controlled and automatically
controlled.
e
makes it do complex sports of radial and axial through four pairs of curve
wheels, and the oil jar loads equably to the curve wheels to achieve the
purpose of straightening the tubing. In order to damage the tubing least
and make the pipe hoop getting through smoothly from the machine, it sets
up automatically rising device. The course of straightening is automatically
controlled, and the straightening speed is 0.5m/s. The machine is also
furnished with tubing rough straightener, adopts the dot type of hydraulic
straightening, and goes ahead of rough straightening the heavier camber
tubing. The overall dimension is 1200*2000(mm), the height of the working
platform is 700(mm). The rough straightener can be loaded on the automatic
line of the corrector, and the power source may be as the hydraulic station
of the corrector. The machine is an independent unit not included in the
corrector, and if the users need it which can be ordered separately.